PimpMySherpa.co.uk Doing up an LDV Camper van

Bodywork

Lifted up the rubber matting in the cab to find they were wet underneath, with the expected consequences to the floor.

It's all just surface rust, so a wire brush down and some of Hammerite's finest Kurust gets slapped on.

I've also taken off the bonnet to improve access to the engine bay. As the bonnet alignment was pretty good, I drew round the hinges to make them easier to refit.

Bonnet release cable is on its last legs so will be replaced.

I've added this emergency parking brake.

Contact me

If you have any questions, feedback or even suggestions, please email me: pete@pimpmysherpa.co.uk

You can do it when you it!